Struct gstreamer_app::AppSink

pub struct AppSink(_);

Appsink is a sink plugin that supports many different methods for making the application get a handle on the GStreamer data in a pipeline. Unlike most GStreamer elements, Appsink provides external API functions.

appsink can be used by linking to the gstappsink.h header file to access the methods or by using the appsink action signals and properties.

The normal way of retrieving samples from appsink is by using the pull_sample() and pull_preroll() methods. These methods block until a sample becomes available in the sink or when the sink is shut down or reaches EOS. There are also timed variants of these methods, try_pull_sample() and try_pull_preroll(), which accept a timeout parameter to limit the amount of time to wait.

Appsink will internally use a queue to collect buffers from the streaming thread. If the application is not pulling samples fast enough, this queue will consume a lot of memory over time. The “max-buffers” property can be used to limit the queue size. The “drop” property controls whether the streaming thread blocks or if older buffers are dropped when the maximum queue size is reached. Note that blocking the streaming thread can negatively affect real-time performance and should be avoided.

If a blocking behaviour is not desirable, setting the “emit-signals” property to true will make appsink emit the “new-sample” and “new-preroll” signals when a sample can be pulled without blocking.

The “caps” property on appsink can be used to control the formats that appsink can receive. This property can contain non-fixed caps, the format of the pulled samples can be obtained by getting the sample caps.

If one of the pull-preroll or pull-sample methods return None, the appsink is stopped or in the EOS state. You can check for the EOS state with the “eos” property or with the is_eos() method.

The eos signal can also be used to be informed when the EOS state is reached to avoid polling.

Implements

gst::prelude::ElementExt, gst::prelude::ObjectExt, trait@glib::ObjectExt, gst::prelude::URIHandlerExt

Implementations

impl AppSink

pub fn is_buffer_list_support(&self) -> bool

This is supported on crate feature v1_12 only.

Check if self supports buffer lists.

Returns

true if self supports buffer lists.

pub fn caps(&self) -> Option<Caps>

Get the configured caps on self.

Returns

the gst::Caps accepted by the sink. gst_caps_unref() after usage.

pub fn is_drop(&self) -> bool

Check if self will drop old buffers when the maximum amount of queued buffers is reached.

Returns

true if self is dropping old buffers when the queue is filled.

pub fn max_buffers(&self) -> u32

Get the maximum amount of buffers that can be queued in self.

Returns

The maximum amount of buffers that can be queued.

pub fn is_wait_on_eos(&self) -> bool

Check if self will wait for all buffers to be consumed when an EOS is received.

Returns

true if self will wait for all buffers to be consumed when an EOS is received.

pub fn is_eos(&self) -> bool

Check if self is EOS, which is when no more samples can be pulled because an EOS event was received.

This function also returns true when the appsink is not in the PAUSED or PLAYING state.

Returns

true if no more samples can be pulled and the appsink is EOS.

pub fn pull_preroll(&self) -> Result<Sample, BoolError>

Get the last preroll sample in self. This was the sample that caused the appsink to preroll in the PAUSED state.

This function is typically used when dealing with a pipeline in the PAUSED state. Calling this function after doing a seek will give the sample right after the seek position.

Calling this function will clear the internal reference to the preroll buffer.

Note that the preroll sample will also be returned as the first sample when calling pull_sample().

If an EOS event was received before any buffers, this function returns None. Use gst_app_sink_is_eos () to check for the EOS condition.

This function blocks until a preroll sample or EOS is received or the appsink element is set to the READY/NULL state.

Returns

a gst::Sample or NULL when the appsink is stopped or EOS. Call gst_sample_unref() after usage.

pub fn pull_sample(&self) -> Result<Sample, BoolError>

This function blocks until a sample or EOS becomes available or the appsink element is set to the READY/NULL state.

This function will only return samples when the appsink is in the PLAYING state. All rendered buffers will be put in a queue so that the application can pull samples at its own rate. Note that when the application does not pull samples fast enough, the queued buffers could consume a lot of memory, especially when dealing with raw video frames.

If an EOS event was received before any buffers, this function returns None. Use gst_app_sink_is_eos () to check for the EOS condition.

Returns

a gst::Sample or NULL when the appsink is stopped or EOS. Call gst_sample_unref() after usage.

pub fn set_buffer_list_support(&self, enable_lists: bool)

This is supported on crate feature v1_12 only.

Instruct self to enable or disable buffer list support.

For backwards-compatibility reasons applications need to opt in to indicate that they will be able to handle buffer lists.

enable_lists

enable or disable buffer list support

pub fn set_caps(&self, caps: Option<&Caps>)

Set the capabilities on the appsink element. This function takes a copy of the caps structure. After calling this method, the sink will only accept caps that match caps. If caps is non-fixed, or incomplete, you must check the caps on the samples to get the actual used caps.

caps

caps to set

pub fn set_drop(&self, drop: bool)

Instruct self to drop old buffers when the maximum amount of queued buffers is reached.

drop

the new state

pub fn set_max_buffers(&self, max: u32)

Set the maximum amount of buffers that can be queued in self. After this amount of buffers are queued in appsink, any more buffers will block upstream elements until a sample is pulled from self.

max

the maximum number of buffers to queue

pub fn set_wait_on_eos(&self, wait: bool)

Instruct self to wait for all buffers to be consumed when an EOS is received.

wait

the new state

pub fn try_pull_preroll(
    &self,
    timeout: impl Into<Option<ClockTime>>
) -> Option<Sample>

This is supported on crate feature v1_10 only.

Get the last preroll sample in self. This was the sample that caused the appsink to preroll in the PAUSED state.

This function is typically used when dealing with a pipeline in the PAUSED state. Calling this function after doing a seek will give the sample right after the seek position.

Calling this function will clear the internal reference to the preroll buffer.

Note that the preroll sample will also be returned as the first sample when calling pull_sample().

If an EOS event was received before any buffers or the timeout expires, this function returns None. Use gst_app_sink_is_eos () to check for the EOS condition.

This function blocks until a preroll sample or EOS is received, the appsink element is set to the READY/NULL state, or the timeout expires.

timeout

the maximum amount of time to wait for the preroll sample

Returns

a gst::Sample or NULL when the appsink is stopped or EOS or the timeout expires. Call gst_sample_unref() after usage.

pub fn try_pull_sample(
    &self,
    timeout: impl Into<Option<ClockTime>>
) -> Option<Sample>

This is supported on crate feature v1_10 only.

This function blocks until a sample or EOS becomes available or the appsink element is set to the READY/NULL state or the timeout expires.

This function will only return samples when the appsink is in the PLAYING state. All rendered buffers will be put in a queue so that the application can pull samples at its own rate. Note that when the application does not pull samples fast enough, the queued buffers could consume a lot of memory, especially when dealing with raw video frames.

If an EOS event was received before any buffers or the timeout expires, this function returns None. Use gst_app_sink_is_eos () to check for the EOS condition.

timeout

the maximum amount of time to wait for a sample

Returns

a gst::Sample or NULL when the appsink is stopped or EOS or the timeout expires. Call gst_sample_unref() after usage.

pub fn is_buffer_list(&self) -> bool

pub fn set_buffer_list(&self, buffer_list: bool)

pub fn connect_buffer_list_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_caps_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_drop_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_eos_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_max_buffers_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_wait_on_eos_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

impl AppSink

pub fn set_callbacks(&self, callbacks: AppSinkCallbacks)

Set callbacks which will be executed for each new preroll, new sample and eos. This is an alternative to using the signals, it has lower overhead and is thus less expensive, but also less flexible.

If callbacks are installed, no signals will be emitted for performance reasons.

Before 1.16.3 it was not possible to change the callbacks in a thread-safe way.

callbacks

the callbacks

notify

a destroy notify function

pub fn drops_out_of_segment(&self) -> bool

This is supported on crate feature v1_12 only.

pub fn max_bitrate(&self) -> u64

pub fn max_lateness(&self) -> i64

pub fn processing_deadline(&self) -> ClockTime

This is supported on crate feature v1_16 only.

pub fn render_delay(&self) -> ClockTime

pub fn stats(&self) -> Structure

This is supported on crate feature v1_18 only.

pub fn is_sync(&self) -> bool

pub fn throttle_time(&self) -> u64

pub fn ts_offset(&self) -> ClockTimeDiff

pub fn is_async(&self) -> bool

pub fn enables_last_sample(&self) -> bool

pub fn is_qos(&self) -> bool

pub fn set_async(&self, enabled: bool)

pub fn set_drop_out_of_segment(&self, drop_out_of_segment: bool)

This is supported on crate feature v1_12 only.

pub fn set_enable_last_sample(&self, enabled: bool)

pub fn set_max_bitrate(&self, max_bitrate: u64)

pub fn set_max_lateness(&self, max_lateness: i64)

pub fn set_processing_deadline(&self, processing_deadline: ClockTime)

This is supported on crate feature v1_16 only.

pub fn set_qos(&self, enabled: bool)

pub fn set_render_delay(&self, delay: ClockTime)

pub fn set_sync(&self, sync: bool)

pub fn set_throttle_time(&self, throttle: u64)

pub fn set_ts_offset(&self, offset: ClockTimeDiff)

pub fn connect_async_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_blocksize_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_enable_last_sample_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_last_sample_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_max_bitrate_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_max_lateness_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_processing_deadline_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

This is supported on crate feature v1_16 only.

pub fn connect_qos_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_render_delay_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_stats_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

This is supported on crate feature v1_18 only.

pub fn connect_sync_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_throttle_time_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn connect_ts_offset_notify<F: Fn(&Self) + Send + Sync + 'static>(
    &self,
    f: F
) -> SignalHandlerId

pub fn stream(&self) -> AppSinkStream

Trait Implementations

impl Clone for AppSink

fn clone(&self) -> AppSink

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AppSink

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Hash for AppSink

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Ord for AppSink

fn cmp(&self, other: &AppSink) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl ParentClassIs for AppSink

type Parent = Element

impl<T: ObjectType> PartialEq<T> for AppSink

fn eq(&self, other: &T) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T: ObjectType> PartialOrd<T> for AppSink

fn partial_cmp(&self, other: &T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for AppSink

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for AppSink

impl IsA<Element> for AppSink

impl IsA<Object> for AppSink

impl IsA<URIHandler> for AppSink

impl Send for AppSink

impl StructuralEq for AppSink

impl Sync for AppSink