[−][src]Struct gstreamer::Bin
Bin
is an element that can contain other Element
, allowing them to be
managed as a group.
Pads from the child elements can be ghosted to the bin, see GhostPad
.
This makes the bin look like any other elements and enables creation of
higher-level abstraction elements.
A new Bin
is created with Bin::new
. Use a Pipeline
instead if you
want to create a toplevel bin because a normal bin doesn't have a bus or
handle clock distribution of its own.
After the bin has been created you will typically add elements to it with
GstBinExt::add
. You can remove elements with GstBinExt::remove
.
An element can be retrieved from a bin with GstBinExt::get_by_name
, using the
elements name. GstBinExt::get_by_name_recurse_up
is mainly used for internal
purposes and will query the parent bins when the element is not found in the
current bin.
An iterator of elements in a bin can be retrieved with
GstBinExt::iterate_elements
. Various other iterators exist to retrieve the
elements in a bin.
GstObjectExt::unref
is used to drop your reference to the bin.
The Bin::element-added
signal is fired whenever a new element is added to
the bin. Likewise the Bin::element-removed
signal is fired whenever an
element is removed from the bin.
Notes
A Bin
internally intercepts every Message
posted by its children and
implements the following default behaviour for each of them:
-
GST_MESSAGE_EOS: This message is only posted by sinks in the PLAYING state. If all sinks posted the EOS message, this bin will post and EOS message upwards.
-
GST_MESSAGE_SEGMENT_START: Just collected and never forwarded upwards. The messages are used to decide when all elements have completed playback of their segment.
-
GST_MESSAGE_SEGMENT_DONE: Is posted by
Bin
when all elements that posted a SEGMENT_START have posted a SEGMENT_DONE. -
GST_MESSAGE_DURATION_CHANGED: Is posted by an element that detected a change in the stream duration. The duration change is posted to the application so that it can refetch the new duration with a duration query. Note that these messages can be posted before the bin is prerolled, in which case the duration query might fail. Note also that there might be a discrepancy (due to internal buffering/queueing) between the stream being currently displayed and the returned duration query. Applications might want to also query for duration (and changes) by listening to the GST_MESSAGE_STREAM_START message, signaling the active start of a (new) stream.
-
GST_MESSAGE_CLOCK_LOST: This message is posted by an element when it can no longer provide a clock. The default bin behaviour is to check if the lost clock was the one provided by the bin. If so and the bin is currently in the PLAYING state, the message is forwarded to the bin parent. This message is also generated when a clock provider is removed from the bin. If this message is received by the application, it should PAUSE the pipeline and set it back to PLAYING to force a new clock distribution.
-
GST_MESSAGE_CLOCK_PROVIDE: This message is generated when an element can provide a clock. This mostly happens when a new clock provider is added to the bin. The default behaviour of the bin is to mark the currently selected clock as dirty, which will perform a clock recalculation the next time the bin is asked to provide a clock. This message is never sent tot the application but is forwarded to the parent of the bin.
-
OTHERS: posted upwards.
A Bin
implements the following default behaviour for answering to a
Query
:
-
GST_QUERY_DURATION: The bin will forward the query to all sink elements contained within and will return the maximum value. If no sinks are available in the bin, the query fails.
-
GST_QUERY_POSITION:The query is sent to all sink elements in the bin and the MAXIMUM of all values is returned. If no sinks are available in the bin, the query fails.
-
OTHERS:the query is forwarded to all sink elements, the result of the first sink that answers the query successfully is returned. If no sink is in the bin, the query fails.
A Bin
will by default forward any event sent to it to all sink
(EventTypeFlags::Downstream
) or source (EventTypeFlags::Upstream
) elements
depending on the event type.
If all the elements return true
, the bin will also return true
, else false
is returned. If no elements of the required type are in the bin, the event
handler will return true
.
Implements
GstBinExt
, ElementExt
, GstObjectExt
, glib::object::ObjectExt
, ChildProxyExt
, ElementExtManual
, ChildProxyExtManual
Implementations
impl Bin
[src]
Trait Implementations
impl Clone for Bin
[src]
impl Debug for Bin
[src]
impl Eq for Bin
[src]
impl Hash for Bin
[src]
fn hash<__H: Hasher>(&self, state: &mut __H)
[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl IsA<Bin> for Pipeline
[src]
impl IsA<ChildProxy> for Bin
[src]
impl IsA<Element> for Bin
[src]
impl IsA<Object> for Bin
[src]
impl Ord for Bin
[src]
fn cmp(&self, other: &Bin) -> Ordering
[src]
#[must_use]fn max(self, other: Self) -> Self
1.21.0[src]
#[must_use]fn min(self, other: Self) -> Self
1.21.0[src]
#[must_use]fn clamp(self, min: Self, max: Self) -> Self
[src]
impl<T: ObjectType> PartialEq<T> for Bin
[src]
impl<T: ObjectType> PartialOrd<T> for Bin
[src]
fn partial_cmp(&self, other: &T) -> Option<Ordering>
[src]
#[must_use]fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]fn le(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
impl Send for Bin
[src]
impl StaticType for Bin
[src]
fn static_type() -> Type
[src]
impl Sync for Bin
[src]
Auto Trait Implementations
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<Super, Sub> CanDowncast<Sub> for Super where
Sub: IsA<Super>,
Super: IsA<Super>,
[src]
Sub: IsA<Super>,
Super: IsA<Super>,
impl<T> Cast for T where
T: ObjectType,
[src]
T: ObjectType,
fn upcast<T>(self) -> T where
Self: IsA<T>,
T: ObjectType,
[src]
Self: IsA<T>,
T: ObjectType,
fn upcast_ref<T>(&self) -> &T where
Self: IsA<T>,
T: ObjectType,
[src]
Self: IsA<T>,
T: ObjectType,
fn downcast<T>(self) -> Result<T, Self> where
Self: CanDowncast<T>,
T: ObjectType,
[src]
Self: CanDowncast<T>,
T: ObjectType,
fn downcast_ref<T>(&self) -> Option<&T> where
Self: CanDowncast<T>,
T: ObjectType,
[src]
Self: CanDowncast<T>,
T: ObjectType,
fn dynamic_cast<T>(self) -> Result<T, Self> where
T: ObjectType,
[src]
T: ObjectType,
fn dynamic_cast_ref<T>(&self) -> Option<&T> where
T: ObjectType,
[src]
T: ObjectType,
unsafe fn unsafe_cast<T>(self) -> T where
T: ObjectType,
[src]
T: ObjectType,
unsafe fn unsafe_cast_ref<T>(&self) -> &T where
T: ObjectType,
[src]
T: ObjectType,
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ObjectExt for T where
T: ObjectType,
[src]
T: ObjectType,
fn is<U>(&self) -> bool where
U: StaticType,
[src]
U: StaticType,
fn get_type(&self) -> Type
[src]
fn get_object_class(&self) -> &ObjectClass
[src]
fn set_properties(
&self,
property_values: &[(&str, &dyn ToValue)]
) -> Result<(), BoolError>
[src]
&self,
property_values: &[(&str, &dyn ToValue)]
) -> Result<(), BoolError>
fn set_property<'a, N>(
&self,
property_name: N,
value: &dyn ToValue
) -> Result<(), BoolError> where
N: Into<&'a str>,
[src]
&self,
property_name: N,
value: &dyn ToValue
) -> Result<(), BoolError> where
N: Into<&'a str>,
fn get_property<'a, N>(&self, property_name: N) -> Result<Value, BoolError> where
N: Into<&'a str>,
[src]
N: Into<&'a str>,
unsafe fn set_qdata<QD>(&self, key: Quark, value: QD) where
QD: 'static,
[src]
QD: 'static,
unsafe fn get_qdata<QD>(&self, key: Quark) -> Option<&QD> where
QD: 'static,
[src]
QD: 'static,
unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD> where
QD: 'static,
[src]
QD: 'static,
unsafe fn set_data<QD>(&self, key: &str, value: QD) where
QD: 'static,
[src]
QD: 'static,
unsafe fn get_data<QD>(&self, key: &str) -> Option<&QD> where
QD: 'static,
[src]
QD: 'static,
unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD> where
QD: 'static,
[src]
QD: 'static,
fn block_signal(&self, handler_id: &SignalHandlerId)
[src]
fn unblock_signal(&self, handler_id: &SignalHandlerId)
[src]
fn stop_signal_emission(&self, signal_name: &str)
[src]
fn disconnect(&self, handler_id: SignalHandlerId)
[src]
fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId where
F: 'static + Send + Sync + Fn(&T, &ParamSpec),
[src]
F: 'static + Send + Sync + Fn(&T, &ParamSpec),
unsafe fn connect_notify_unsafe<F>(
&self,
name: Option<&str>,
f: F
) -> SignalHandlerId where
F: Fn(&T, &ParamSpec),
[src]
&self,
name: Option<&str>,
f: F
) -> SignalHandlerId where
F: Fn(&T, &ParamSpec),
fn notify<'a, N>(&self, property_name: N) where
N: Into<&'a str>,
[src]
N: Into<&'a str>,
fn notify_by_pspec(&self, pspec: &ParamSpec)
[src]
fn has_property<'a, N>(&self, property_name: N, type_: Option<Type>) -> bool where
N: Into<&'a str>,
[src]
N: Into<&'a str>,
fn get_property_type<'a, N>(&self, property_name: N) -> Option<Type> where
N: Into<&'a str>,
[src]
N: Into<&'a str>,
fn find_property<'a, N>(&self, property_name: N) -> Option<ParamSpec> where
N: Into<&'a str>,
[src]
N: Into<&'a str>,
fn list_properties(&self) -> Vec<ParamSpec>
[src]
fn connect<'a, N, F>(
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
N: Into<&'a str>,
[src]
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,
N: Into<&'a str>,
fn connect_local<'a, N, F>(
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value> + 'static,
N: Into<&'a str>,
[src]
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value> + 'static,
N: Into<&'a str>,
unsafe fn connect_unsafe<'a, N, F>(
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value>,
N: Into<&'a str>,
[src]
&self,
signal_name: N,
after: bool,
callback: F
) -> Result<SignalHandlerId, BoolError> where
F: Fn(&[Value]) -> Option<Value>,
N: Into<&'a str>,
fn emit<'a, N>(
&self,
signal_name: N,
args: &[&dyn ToValue]
) -> Result<Option<Value>, BoolError> where
N: Into<&'a str>,
[src]
&self,
signal_name: N,
args: &[&dyn ToValue]
) -> Result<Option<Value>, BoolError> where
N: Into<&'a str>,
fn downgrade(&self) -> WeakRef<T>
[src]
fn bind_property<'a, O, N, M>(
&'a self,
source_property: N,
target: &'a O,
target_property: M
) -> BindingBuilder<'a> where
M: Into<&'a str>,
N: Into<&'a str>,
O: ObjectType,
[src]
&'a self,
source_property: N,
target: &'a O,
target_property: M
) -> BindingBuilder<'a> where
M: Into<&'a str>,
N: Into<&'a str>,
O: ObjectType,
fn ref_count(&self) -> u32
[src]
impl<'a, T> ToGlibContainerFromSlice<'a, *const GList> for T where
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
[src]
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
type Storage = (Option<List>, Vec<Stash<'a, <T as GlibPtrDefault>::GlibType, T>>)
fn to_glib_none_from_slice(
t: &'a [T]
) -> (*const GList, <T as ToGlibContainerFromSlice<'a, *const GList>>::Storage)
[src]
t: &'a [T]
) -> (*const GList, <T as ToGlibContainerFromSlice<'a, *const GList>>::Storage)
fn to_glib_container_from_slice(
_t: &'a [T]
) -> (*const GList, <T as ToGlibContainerFromSlice<'a, *const GList>>::Storage)
[src]
_t: &'a [T]
) -> (*const GList, <T as ToGlibContainerFromSlice<'a, *const GList>>::Storage)
fn to_glib_full_from_slice(_t: &[T]) -> *const GList
[src]
impl<'a, T> ToGlibContainerFromSlice<'a, *const GPtrArray> for T where
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
[src]
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
type Storage = (Option<PtrArray>, Vec<Stash<'a, <T as GlibPtrDefault>::GlibType, T>>)
fn to_glib_none_from_slice(
t: &'a [T]
) -> (*const GPtrArray, <T as ToGlibContainerFromSlice<'a, *const GPtrArray>>::Storage)
[src]
t: &'a [T]
) -> (*const GPtrArray, <T as ToGlibContainerFromSlice<'a, *const GPtrArray>>::Storage)
fn to_glib_container_from_slice(
_t: &'a [T]
) -> (*const GPtrArray, <T as ToGlibContainerFromSlice<'a, *const GPtrArray>>::Storage)
[src]
_t: &'a [T]
) -> (*const GPtrArray, <T as ToGlibContainerFromSlice<'a, *const GPtrArray>>::Storage)
fn to_glib_full_from_slice(_t: &[T]) -> *const GPtrArray
[src]
impl<'a, T> ToGlibContainerFromSlice<'a, *mut GArray> for T where
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
[src]
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
type Storage = (Option<Array>, Vec<Stash<'a, <T as GlibPtrDefault>::GlibType, T>>)
fn to_glib_none_from_slice(
t: &'a [T]
) -> (*mut GArray, <T as ToGlibContainerFromSlice<'a, *mut GArray>>::Storage)
[src]
t: &'a [T]
) -> (*mut GArray, <T as ToGlibContainerFromSlice<'a, *mut GArray>>::Storage)
fn to_glib_container_from_slice(
t: &'a [T]
) -> (*mut GArray, <T as ToGlibContainerFromSlice<'a, *mut GArray>>::Storage)
[src]
t: &'a [T]
) -> (*mut GArray, <T as ToGlibContainerFromSlice<'a, *mut GArray>>::Storage)
fn to_glib_full_from_slice(t: &[T]) -> *mut GArray
[src]
impl<'a, T> ToGlibContainerFromSlice<'a, *mut GList> for T where
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
[src]
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
type Storage = (Option<List>, Vec<Stash<'a, <T as GlibPtrDefault>::GlibType, T>>)
fn to_glib_none_from_slice(
t: &'a [T]
) -> (*mut GList, <T as ToGlibContainerFromSlice<'a, *mut GList>>::Storage)
[src]
t: &'a [T]
) -> (*mut GList, <T as ToGlibContainerFromSlice<'a, *mut GList>>::Storage)
fn to_glib_container_from_slice(
t: &'a [T]
) -> (*mut GList, <T as ToGlibContainerFromSlice<'a, *mut GList>>::Storage)
[src]
t: &'a [T]
) -> (*mut GList, <T as ToGlibContainerFromSlice<'a, *mut GList>>::Storage)
fn to_glib_full_from_slice(t: &[T]) -> *mut GList
[src]
impl<'a, T> ToGlibContainerFromSlice<'a, *mut GPtrArray> for T where
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
[src]
T: GlibPtrDefault + ToGlibPtr<'a, <T as GlibPtrDefault>::GlibType>,
type Storage = (Option<PtrArray>, Vec<Stash<'a, <T as GlibPtrDefault>::GlibType, T>>)
fn to_glib_none_from_slice(
t: &'a [T]
) -> (*mut GPtrArray, <T as ToGlibContainerFromSlice<'a, *mut GPtrArray>>::Storage)
[src]
t: &'a [T]
) -> (*mut GPtrArray, <T as ToGlibContainerFromSlice<'a, *mut GPtrArray>>::Storage)
fn to_glib_container_from_slice(
t: &'a [T]
) -> (*mut GPtrArray, <T as ToGlibContainerFromSlice<'a, *mut GPtrArray>>::Storage)
[src]
t: &'a [T]
) -> (*mut GPtrArray, <T as ToGlibContainerFromSlice<'a, *mut GPtrArray>>::Storage)
fn to_glib_full_from_slice(t: &[T]) -> *mut GPtrArray
[src]
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T> ToSendValue for T where
T: ToValue + SetValue + Send + ?Sized,
[src]
T: ToValue + SetValue + Send + ?Sized,
fn to_send_value(&self) -> SendValue
[src]
impl<T> ToValue for T where
T: SetValue + ?Sized,
[src]
T: SetValue + ?Sized,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,